I was searching for a new smaller printer/scanner recently. I don't print out much, so I wanted a black-and-white laser printer. I also wanted a scanner so that I can get rid of my old printer/scanner since it's so big.
Finding a new printer that is supported by open drivers is really difficult, and configuring SANE backends is not my definition sanity. However, I looked on the SANE database and found that Samsung's SCX-4623 is supported. I couldn't find any support in the Linux Foundation's OpenPrinting database for the SCX-4623. So...I took a leap of faith and bought the printer for about $150.
To be clear, many vendors, including Samsung, offer binary drivers for their printers. However, I really wanted to use the open drivers so that I could contribute to the systems involved instead of being locked out.
The first step was to get the scanner working. At first, I tried to get the xerox_mfp backend working. I just added the following line into the /etc/sane.d/xerox_mfp.conf config file: "usb 0x04e8 0x3440". This did not work as the SANE backend did not seeing the scanner. After a significant troubleshooting effort, I found that the SANE backend had a bug that prevented USB scanners from being used with the xerox_mfp backend. I have reported the bug and presented a patch to the SANE community. See it here. After applying this patch, I was able to successfully scan at 1200dpi in color. That's full capacity for this machine. Success is mine!
This machine also supports ethernet and wireless. Both worked for scanning after configuring the xerox_mfp backend with the machine's network address and port. The same bug didn't affect the networked support for the xerox_mfp backend, so everything just worked.
Great, so the scanner works, now what?
My next step is to write a PPD to properly describe this printer fully. I am also trying to figure out out to get this info integrated into the OpenPrinting database.
Having said all this, my printer/scanner is running totally on free and open source software, and I can recommend this to others looking for a printer that's fully supported by free and open source software.
I would also like to reach out to Samsung and encourage them to let their users know this information so that their users don't have to go through the hassle of installing binary only drivers that only work on x86_64 or i386 architectures.
This information probably also applies to the SCX-4623F, which doesn't have wireless support.
